PDA

View Full Version : Parting out big time



CDMA
10-29-2000, 01:08 PM
Ok well the purchase of my new engine is complete. Now in order to make room for my new one and make sure I have enough $$$ in my pocket here are the following:

Remanufactured SB
Redone 3 years ago
Complete
Previously owned by Paul O
Meticulously maintained
New starter
New circ pump
New fuel pump
New Hei dist
New wires
Oil changed every 20 hours
All repainted
Remote oil filter
Quadrajet
Heads off for inspection (will reassemble if desired)
Bore excellent No scoring still crosshatching there
All new hoses
Manifolds and risers 3 years old and EXCELLENT
Water jackets look new
Built the 260 mercruiser specs
4 bolt main
30 over
Block drains
Ran PERFECT
Never had any ANY problems

$1500
Will help arrange shipping but shipping paid by buyer
Also will consider parting out

I week than e bay

350 2 bolt main (all information on this engine is true as far as I know) bought for Patience went another root

Good heads (appear)
Redone 7000 automotive miles ago
Block slightly scored
Needs boring
None marine
Appears to be a good block, crank, and rods
30 over
flat top pistons
Sold as a long block
Will definitely part out
Any reasonable offer accepted
Shipping paid by you done by me


1968 Volvo 200 drive
Open
Only good for parts
Corroded casing
Gears/shafts and so forth look good
Parts only
Also have transom housing for this drive. Not all hardware included. No helmut and so forth.
Only good for possible parts
$250

Trailer-
NO RUST
Galvanized
For 18 foot Donzi
Cox built like a brick
New tires, bearing, hubs, springs, rollers (yellow ones the good kind $$$), winch, strap,
Excellent condition
New lights
All articulating arm set up
Fits 18 donzi well
Would not sell but can’t get tongue weight right
Perfect with Sb ford and 200 volvo
Fine with Sb chevy and 280 volvo
Add 200 pounds (a la BB) and it will do a tail stand
All it needs if you want is a fender (dented)

You pick up
$1200


If seriously interested can send pictures

Chris

Kong
12-18-2000, 09:28 AM
Chris - Volvo 200 still for sale - any pictures of the parts. Any good spped props to go w/the unit. I'm looking for spare components in case mine ****s the bed.

Ralph Savarese
12-19-2000, 05:58 PM
Chris how about transom shield and steering arms does it go with the package and will that shield fit a 270