PDA

View Full Version : Donzi garage sale



Jamesbon
05-17-2001, 10:04 PM
Stainless Marine SBC exhaust manifolds and 4" custom long tube stainless risers. Used around a year on a fresh water cooled engine. EXCELLENT condition. SOLD

388 Cu. in. SBC. GM Fast Burn 58cc aluminum heads, Edelbrock Vic Jr. Vortec intake, .540 lift solid roller cam, forged 16 cc dished pistons, scat 400 stroker crank, Manley rods, HV oil pump, windage tray, 4 bolt block, 400 balancer and counter weight plate. 10:01:1 compression, runs fine on pump gas. Less than 50 hrs. Always fresh water cooled, no salt in this one. A bunch of guys heard her at the Sanford get together and can attest to the fine tune she sings, just ask 'em. SOLD

Nibral bronze prop for Volvo. 15x24 RH $100 SOLD

Volvo transom assembly SOLD

Volvo "piece that fits between the bell housing, transom assy. and drive." $50

Box of what used to be a Volvo "screw jack" tilt assembly. You pay the shipping and it's yours. (see a pic first, it's rough and broken)

And, oh yeah, my two front seats. Make me an offer...


Pics @ http://albums.photopoint.com/j/AlbumList?u=1229726 Just browse through the albums, all my stuff is there.

Nathan
nschlaeppi@templeton.com
(h) 727 319 9721
(w) 800 632 2350 ext. 33552

AIRGRADY
05-17-2001, 10:21 PM
2800! Sounds like the best bargain on the whole DONZI REGISTRY.

Seriously, I can assure all of you, THIS MOTOR SOUNDS BAD A$$! Somebody with an 18 and a tired 350 needs this motor. Trust me.

Grady

jaroot
05-18-2001, 07:31 AM
Will those manifolds work without relocating the thru hull locations on a 97 16 classic w/350. Will they fit under the hatch or are they significantly higher than the stock merc setup?

Thanks eh

Greg
05-18-2001, 08:38 AM
I might be interested in the motor and headers as a package. About how much H.P.? and how fast did it make your boat go?

------------------

Jamesbon
05-19-2001, 09:33 PM
jaroot,
One would probably have to cut new holes for the exhaust. Unless you're VERY creative.

In all probability, they would fit under the hatch.

Riley
05-20-2001, 07:31 PM
Nathan, that engine sounds like a great deal. Why are you selling?? How many hours are on the engine? Any idea of the horsepower @ rpm?

Jamesbon
05-21-2001, 10:11 AM
Riley,
I purchased a 502 and have no use for the 388. She's probably putting out 400 to 450 HP. (never dyno'd) About 50 hrs on her.

Thanks..Nate