PDA

View Full Version : ShoreStation Boat Lift for Classic (UPDATED WITH PICTURES!!!!)



Rootsy
01-16-2002, 07:06 PM
Shore Station Aluminum Boat Lift (New 1997)
Model# SS-36108A
3600 Lb Capacity
108 in Long X 102 in wide
54 inch Height Adjustment
V Bunks for Stern, Upright Guides for Bow, Wood Pads Front and Rear - Reenforced Polymer Sheaths for upright guide covers(TOUGH STUFF)
Stern Drive Bumper Hoop
12V Electric Lift Motor Option
Good Condition, set up for 16 Classic
Easily setup for 18 Classic or other boat.
Weighs about 500 lbs
$2750.00

Located in Southern Michigan, 5 miles from Michigan International Speedway.

616 962 8257 X2118 (8 am to 5 pm)
email: jaroot@tdi.net

I can take pictures and email if you'd like.

Jamie

SS18
01-16-2002, 08:01 PM
Hi james,
If you could send pics.I would like to see if it would work for my slip.Since we are primarily in salt water my marina agreed to a lift at my cost.
Jim in NJ

Rootsy
02-04-2002, 08:46 PM
here are some pics... brrrr cold of winter... she'd look so much better with a beautiful boat on her.. dontcha think?

there is absolutely nothing wrong, lift is in good condition, used 2 seasons by me without issue. comes with 12V electric lift motor attachemnt (not shown in pic).


picture 1 (http://www.tdi.net/jaroot/pictures/donzi/picture010.jpg)
picture 2 (http://www.tdi.net/jaroot/pictures/donzi/picture011.jpg)
picture 3 (http://www.tdi.net/jaroot/pictures/donzi/picture012.jpg)
picture 4 (http://www.tdi.net/jaroot/pictures/donzi/picture009.jpg)