MattM
12-06-2003, 10:05 PM
A few months ago I began searching for a Regazza 19 for a dock beater to suppliment the C18.
Didn't find one, but found a Z21 instead. I have a few questions:
1. The side exit exhaust is too loud (never thought I'd say that), for the kids and wife to enjoy playing with it. There appears to be an exhaust passage out to the alpha drive on the outside of the transom plate but there was too much in the way to see the inside. Are all alpha drives capable of through hub exhaust?
2. Is somebody currently making the small brushed stainless DONZI hull stickers like on the '87 vintage boats and the larger ones with the crests from the '89 and up boats?
3. Is that a good wakeboard boat, and good enough ski boat? What issues might I run in to expecting that?
4. Boat VIN is DMRZA0094B747, boat is supposed to be '87, is this correct?
5. Boat has yellow/ brown stains blotchy all over the light grey top side, they seem to sand through, but wouldn't come off w/ rubbing compound. Will FSR or some other product take this off?
6. Finally, boat has part of a speed coat or bottom paint on it. Is there a remover I can use to get it off w/out damaging the gell?
Thanks, Matt
Didn't find one, but found a Z21 instead. I have a few questions:
1. The side exit exhaust is too loud (never thought I'd say that), for the kids and wife to enjoy playing with it. There appears to be an exhaust passage out to the alpha drive on the outside of the transom plate but there was too much in the way to see the inside. Are all alpha drives capable of through hub exhaust?
2. Is somebody currently making the small brushed stainless DONZI hull stickers like on the '87 vintage boats and the larger ones with the crests from the '89 and up boats?
3. Is that a good wakeboard boat, and good enough ski boat? What issues might I run in to expecting that?
4. Boat VIN is DMRZA0094B747, boat is supposed to be '87, is this correct?
5. Boat has yellow/ brown stains blotchy all over the light grey top side, they seem to sand through, but wouldn't come off w/ rubbing compound. Will FSR or some other product take this off?
6. Finally, boat has part of a speed coat or bottom paint on it. Is there a remover I can use to get it off w/out damaging the gell?
Thanks, Matt