PDA

View Full Version : Problem with my Volvo Ultra Prop



Rob
07-07-2001, 12:35 PM
I just received my prop back from Admiral Propellor in Tampa after they replaced the hub. Unfortunately the hub they installed will not slide onto the propshaft. It has the right number of splines (17), but the splines on the hub seem to be two wide to slide into the grooves on the propshaft.

I guess there must be two different styles of hubs, and they installed the wrong one. Can anyone confirm this is the case?


------------------
Rob

Forrest
07-09-2001, 10:12 AM
As far as I know there is only one size Volvo-Penta 17 spline prop shaft. The only thing that I can think was maybe the spline cutter at Michigan Wheel was set wrong. I would give a call down to Admiral. I know that they will make it right.

------------------
Forrest