Ralph Savarese
10-11-2000, 05:41 PM
Any suggestions on type, style, cost,? I was looking at the Imco Tips
I am running stock Volvo penta center risers
and i now have them elboed to the old original 2 1/2" ports . During the restoration i am planinng on going straight out the back but i am concerned that the down angle of the riser might be too much .Will the hose make that angle up? I measured the hose it fits on the manifold some where between
3 1/2" and 4".I would suspect that i have to go about 1 1/2' to the back of the boat. Hopeing i could make that angle back straight with the hose.
Ralph
I am running stock Volvo penta center risers
and i now have them elboed to the old original 2 1/2" ports . During the restoration i am planinng on going straight out the back but i am concerned that the down angle of the riser might be too much .Will the hose make that angle up? I measured the hose it fits on the manifold some where between
3 1/2" and 4".I would suspect that i have to go about 1 1/2' to the back of the boat. Hopeing i could make that angle back straight with the hose.
Ralph