PDA

View Full Version : GeneD/ other mercruiser guys


CDMA
03-20-2001, 10:20 PM
Gene I know you are away but is there anyway I could borrow those Mercruiser jig's. Anyway to get to them or anyone else have them?

Thanks Guys


Chris

I have so much left to do on the 18...errrrr
And the 22 is beckoning.
GeneD
03-21-2001, 07:07 AM
Oh you little Donzi student you...
Didn't I ask you if you wanted me to bring them up??????
Gee Chris, what to do, what to do?
I don't know. Who is coming to the Sanford thing from up here? Someone could bring them back for you?
Shipping will be extrememly hard for me Chris, I start a new job in Palm Beach and will be away from my shop for weeks at a time. When I go back to Melbourne, I will be busy as a Donzi beaver getting my act together. I have no problem throwing the stuff in the back of the truck and bringing it to Orlando. You gotta work out something with someone.
Any volunteers?

------------------
GeneD
007
Melbourne, Florida
BERTRAM BOY
03-21-2001, 04:57 PM
Hey,
Chris, I'm going to be in Sanford next weekend. If Geoo will agree,I can give it to him, and in turn, you can get it from him.....or ,it might be easier to just ship it. Anyway, I'm willing to help out.
BERTRAM BOY
CDMA
03-21-2001, 05:09 PM
If you can get it I will pay shipping no problem.

CDMA
BERTRAM BOY
03-21-2001, 05:24 PM
No problem Chris,
Just remind Gene to bring it. By the way, how big is it?
BERTRAM BOY
CDMA
03-21-2001, 09:16 PM
Scott that would be fine as well. Whoever wants to do it.

Chris
CDMA
03-21-2001, 10:19 PM
BTW all I really need is the transom jig not the motor mount jig...I can get that from Paul.

Chris
GeneD
03-22-2001, 02:23 PM
No problem with the drive jig.
I'll give it to Scott...
Which one, the Bravo or the Alpha?
Oh, and are you sure PaulO has the MM jig? The one that fits into the transom plate and slides into the gimbal bearing?

------------------
GeneD
007
Melbourne, Florida

[This message has been edited by GeneD (edited 03-22-2001).]
CDMA
03-22-2001, 06:43 PM
Alpha...yup Paul has got his own.

Chris
CDMA
03-22-2001, 07:02 PM
Guys,

Any idea time wise when I might get this???

Chris
GeneD
03-22-2001, 08:05 PM
MP?

------------------
GeneD
007
Melbourne, Florida
CDMA
03-23-2001, 08:52 AM
How about the cheapest shipping that would get it here before the weekend???

Thanx a million guys
www.webb-institute.edu (http://www.webb-institute.edu)

Chris
GeneD
03-23-2001, 09:46 AM
Which weekend?
Remember, the Sanford thing is not until next weekend, March 31-April 1.
I don't get back to Melbourne until the 30th.
Scott will not have it at his shop until at least the 2nd.
Schedule gonna suffer?


------------------
GeneD
007
Melbourne, Florida
CDMA
03-23-2001, 09:56 AM
We will see if it is too long I will just trace the hole on the 22 and cut away. I will make sure to let you guys know what my status is before that weekend.

Chri
CDMA
04-02-2001, 01:25 PM
Done...thanks guys
CDMA
04-06-2001, 03:19 PM
Guys,

I got the jig. Thank you very much. There are two holes on the top that the alpha doesn't appear to use. Is that for a Bravo?

Chris
GeneD
04-06-2001, 10:31 PM
Can't pull one over on you can we?
The big holes are for the Bravo, the small ones are for the steering yoke.


------------------
GeneD
007
Melbourne, Florida