PDA

View Full Version : I need help on how to pull eng?



okeykid
06-30-2001, 12:48 PM
I need to pull engine out of 1970 16 h/m .
Can I unbolt it from the bell housing,does not seem to be room any other way.
I have it striped down to the block, also how high do I need to lift it.

------------------
hp2bsq

Blewbyu
07-01-2001, 03:45 AM
Yeah,you may unbolt it from the bell....then lift it far enuf to git it out.Tip the nose up and to port as soon as you disconnect at the housing.