PDA

View Full Version : Pics of the new gauges...in action!!!



blackhawk
08-18-2002, 08:19 PM
Here's a pic of the new gauges...at WFO! :D

http://www.donzi.net/photos/elgas0818021.jpg

Donzi Blackhawk
08-18-2002, 10:25 PM
Hello Blackhawk,

Wfo? I noticed your tach turning just under 4600 rpm. Your 502 hits the rev limiter at 5050. Why are you down so many rpm's? More rpm = more mph. Let me know, something is not adding up.

Bryant

Cuda
08-18-2002, 10:27 PM
Nice! I just hope you weren't focusing the camera at 77 mph. eek! Upon further review, I see you live in Michigan, that's a long ways from me, go ahead! :rolleyes:

MOP
08-19-2002, 06:56 AM
Very sweet looking dash, if you are happy with 4600 leave it there I believe BB will last longer at the lower RPM's.

blackhawk
08-19-2002, 08:12 AM
Bryant, with the new tach I am running anywhere from 46-4800 rpm depending on conditions. The water was very soupy yesterday do I was dragging a little tab on occasion. I knew that my VDO tach was reading high. I am actually happy that I am only running 4600-4800 because hopefully that means I can gain 1-2 mph with some prop work! :D

blackhawk
08-19-2002, 11:59 AM
Wait, let me answer that again. I was only running 4600 rpm because that was only 3/4 throttle! :D

blackhawk
08-19-2002, 05:51 PM
Cuda

Don't worry, I only get to Clearwater once a year. But, when I do I bring the camera and the camcorder! eek! :D

Cuda
08-19-2002, 08:05 PM
eek! :o :D Please give a proper notice. wink :D