PDA

View Full Version : OMC - King Snake



Mark Albers
04-18-2002, 11:16 PM
Donzi Aficionados wink

My engine wants to stall when put into drive
When I use the throttle up lever(in neutral)no hesitation
Some say it is a electrical sensor for safty
and might be warring out

So with that in mind....

Where is the bugger located
and
How much for the part/parts ???

Mark 311 :cool:
Sarasota - - - W F O (close to the factory and far from a dream)

http://www.donzi.net/photos/Donzieng2.jpg

AVickers
04-19-2002, 09:02 AM
What year?

The earlier versions have an ignition cutoff just like the Merc Alpha. Tt's probably mechanical. The switch is probably up on the shift linkage somewhere.

Mark Albers
04-19-2002, 05:55 PM
She is a 93 22 Classic

Mark 311
Sarasota - - - W F O

marcdups
04-19-2002, 08:54 PM
Mark, it sounds like the safety interupt switch, happens quite often, it may just be that your shift cables need adjusting, It is a small micro switch located on the shift bracket where your control cable and the one that goes to the lower unit, or the spring may be worn on the switch,do not have a part # but that is what I would try first, Good luck

Marc