View Full Version : Hood Vibration 22 Classic and windshield...
cummins
08-09-2002, 07:32 AM
My 22 classic hood vibrates. Is this a problem with others? I was wondering if a simple fix would be a stiffer spring or foam stripping around the hood cut out?
Other persistent problem is the rubber moulding on the inside drivers side windshield keeps come down...It's driving me crazy :D
Thanx Cummins (:=
I put three hard rubber 1/2" thick 3" long and re-adjusted my latch's. You can try pulling the rubber down from the glass clean the grove and rubber well, then apply a little clear silicone up into the grove on the metal side it sticks better to the metal than the glass. That will work in most cases.
HELLERBOY
08-09-2002, 09:32 AM
cummins,
put match stick between glass and the moulding. cut the end off with a razor blade if it sticks out.
take a motor mount (rubber)from a old pool pump,cut it into strips and put it in the hatch grove(one each side two up front)all good now.
Tomahawk
08-10-2002, 06:04 AM
Same deal - Home Depot - foam weather strip, it's sticky on one side, fits in the channel and works.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.