PDA

View Full Version : Need help finding an old JABSCO water pump



JWCall
06-24-2003, 08:53 PM
My current pump seized up. I took it apart and it needs a rebuild kit or totally replaced. It is part # 11850-0801. It is off of a Holman Moody 351w. Any leads would be excelent. These are some pics of it. http://www.donzi.net/photos/pump2.jpg http://www.donzi.net/photos/pump3.jpg

mattyboy
06-24-2003, 09:03 PM
JW,
same setup as my 351w check all bigger supply houses, http://www.boatersworld.com
or http://www.westmarine.com or go right to the source
http://www.jabsco.com

and do a search on jabsco they are still around I just got a new impellor for the same pump

Matty

penbroke
06-24-2003, 09:49 PM
Lots of good pump info @ Depco Pump's web page (http://www.depcopump.com).

I think your pump is shown at the bottom of this page. (http://http://www.depcopump.com/catalog107/80.pdf)

Frank
The stuff is out there but it's not always easy to find... :rolleyes:

David Ochs
06-25-2003, 12:32 AM
JW,
I'm fortunate to live not too far from Jabsco. They are in Orange County, CA.
After attempting to rebuild my old pump with parts bought from West, and consequently breaking the ceramic, I took it to them and they made it brand new again. Although it's been too long to remember the cost, it wasn't unreasonalbe.

JWCall
06-25-2003, 01:28 PM
Thanks alot guys. I called up Depcos and they had all of the stuff I need to rebuild it. :) The guy at Depcos was great, I really recomend them.