View Full Version : spark plug wires
falcon
06-24-2003, 09:37 AM
my motors came with mallory wires-8mm silicon--can i pick up a set at auto speed shop--will they be correct length?
also can't find identification for my distributor cap---it is blue, male style, has two plugs at base.
these are on a marine power big-block -premium motor
Summit has a lot of Mallory.
http://store.summitracing.com/vendor.asp?d=11&s=143&v=MAA
Rootsy
06-26-2003, 09:47 PM
unless you can find a specific application it'll be difficult getting matching lengths... most of what you find is for an auto application and finidng a hi-perf wire set for a boat or car going UNDER the manifolds such as on a boat is difficult.
you might CHECK CP Performance or Rex Marine though.
i generally just go with MSD 8.5 mm wire kits and make up my own lengths... takes me about 30 - 60 mintues to do a set just taking my own sweet time.
falcon
06-27-2003, 08:21 AM
thanks for the response--i ended up buying mercruiser wires--i opted for the ones they sell for the hp500----
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.