K planes

[Cuda]

Does anyone know the psi of the lines that operater the planes? I'm replacing them and had them made at Goodyear, just want to be sure they are up to the task.

[MOP]

This realy does not give you the right answer, but I have a buddie that replaced one line with the neoprene line that is used on out board fuel tanks. I think he put barbs in place and I saw one small S/S clamps on each end, I know he ran atleast the whole season that way. I do not think the pressure is that high.

[Cuda]

I found that the relief valve is set at 2500 psi. The lines I used are rated at 3000, so it's all good. :)