PDA

View Full Version : 1995 350 Magnum Specs



harbormaster
05-20-2002, 06:11 PM
Anyone have the specs for the 350 Magnum engine put in 1995 Donzi Classics?

RickR
05-20-2002, 07:52 PM
I have spec for 92 , should be the same.
1992 350 Mag
250 Propshaft HP
9.3:1 Compression
4400 to 4800 WOT
1.5:1 gear ratio
938# Total weight

Rootsy
05-20-2002, 07:56 PM
actually i believe the carburated 350 mags were 270 @ prop, when the change to vortec cylinder, heads, roller camshafts and fuel injection came along the rating changed to 300 @ prop...

believe the WOT rating of the mag is 46 - 5000 rpm

feel free to correct me if i am wrong...

Sagbay32
05-20-2002, 09:14 PM
All of the info I have looked at say 250 HP for 1995 Mag. I have been trying to find the correct answer as well. I have been told 250, 260, 270 etc.

Tidbart
05-21-2002, 09:01 PM
The only specs I see in the Merc books for 1995 are for an MCM Bravo 350 Magnum EFI/MP, ser# OF289431 - OF601999.
Propshaft HP - 265
B/S - 4.00 x 3.48
Comp ratio - 9.1:1
Max RPM at WOT - 4600-5000
If you want any more numbers, just ask.
I hope this helps.

Bob

RickR
05-21-2002, 09:25 PM
My Clymer manual says
1995 350 Mag (Alpha) 250HP
1995 350 Mag (Bravo I)EFI/MP 265HP