Dash molding

[Ralph Savarese]

Looking for the edge molding that goes around the bottom edge of the dash 66 2+3. Anyone know where I can find this stuff?
Ralph

[Sagbay32]

If it is like the U-shaped molding on the newer boats, I saw some in BOATUS. It is called Flex Trim, comes in black or white.

I found it under item #125059 at www.boatus.com (http://www.boatus.com)

Hope this helps.

[Scott Pearson]

Ralph,
Here are 2 web sites. The first you will have to get a catalog from because the part of that site doesn't have pictures. I know they have the Mld. you are talking about.
http://www.tacometals.com/custom/index.html

Ok...this 2nd site has the correct aluminum mld. for the floor. You know the one that is inbetween
the ski rack and the seats. Its the first picture on the left. But unless the rack is out you will not be able to replace this because it is rivited in.
http://www.tapeease.com/aluminum_or_stainless_steel_t-mouldings.htm

(NJ)Scott

[Ralph Savarese]

Thanks so much Scott, but I am at a loss it has been so many years since the boat had either one of those moldings I was wondering if you could point out which ones are correct.
Thanks Ralph

[Scott Pearson]

Ralph,
You need to get the catalog. It use to come up on the site and I remember seeing it there. I guess they are updating that part of the site. If I saw it again I would know. See if you can get the catalog and let me know. The mld. is flat under the deck where it gets screwed into the glass. The part you see is somewhat tapered or rounded. I believe its only about 3/8 or so.

(NJ)Scott