PDA

View Full Version : Prop cracks



BillG
05-07-2002, 02:11 PM
Has anyone experienced cracking on a Volvo stainless prop. The prop did not strike anything.
The cracks are about a half inch long on the trailing edge and about a quarter of an inch on the leading edge. Any thoughts would be appreciated.
Bill G

BigGrizzly
05-07-2002, 07:12 PM
If all the trailing edges the same it is probably a referbished prop and a ventalation problem. All of my aluminum props have it and a burned hub. My Hill prop has some slight pitting at the hub. My cure was a Hydromotive nose cone. This stopped most of it.

Randy