View Full Version : Need measurements off a 22 Classic
Rick, Ted, etc..
Is there anyone who could either tonight or early tommorow check 2 things out on a 22 for me.
I need to know the angle of the transom
And the distance from the bottom of the v to the hull to deck joint.
Thanks in advance
Chris
Anyone please???? My boat is an hour and a half away and no one is home.
Chris
RickR
10-18-2001, 01:42 PM
I'll have them by 5pm.
1st measurement is deadrise or keel to transom angle?
The second measurement is from the bottom of keel vertically to hull/deck joint?
First measurement is not the deadrise but the transom angle.
and the second on is like you said form the deepest part of the v to the hull deck joint.
Chris
RickR
10-18-2001, 04:06 PM
Transom angle is appx 14 degrees from vertical(104 degrees). It is a difficult measurement because the transom dips in around the drain plug.
Distance from keel to center of rubrail is appx 33" but there is a lip (2.75" where the hull deck joint is.
Thanks Rick. Just what I was looking for.
Chris
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.