Windshield Gasket Help

[Jim]

Don't know if anyone remembers but I have a 1988 Z21
which needed the windshield replaced. The frame was fine
but I ended up replacing all 3 pieces of the plexiglass. What
I'm now looking for is the ribbed gasket that helps hold the windshield
in the frame, does anyone have any contacts? I included some pictures
since its a double sided ribbed gasket with like a 25 degree edge on one
side, kind of hard to explain.

Thanks Jim
PS. The windshield came out great and I will post some pics once I get the frame back togather. I used a company out of Boston, MA. by the name of Multi-Fab.
http://www.donzi.net/photos/jslahtosky20.jpg
http://www.donzi.net/photos/jslahtosky21.jpg

[MOP]

Alot of the glass shops have that stuff in stock or can order it, try a yellow page trip.

[Greg K]

You can try these people... Clean Seal (http://www.cleanseal.com/products.htm)
Another is Wefco Rubber (http://www.wefcorubber.com/)

Hard to tell what the profile is of what you got there..

[ToonaFish]

Set the triplets next to it so we can determine the size needed... :D

Bunches,

Celene 'betting that at two, the triplets (http://www.donzi.net/cgi-bin/ultimatebb.cgi?ubb=get_topic;f=1;t=003961) don't set down often'

[Jim]

Thanks for the help guy's, I will let you know
how I make out.

What memory our board members have, they boy's keep pointing at the donzi and say boat that sounds moore like boot. We had them out 5 times last year but I think they will me a little more mobile this year, here's a couple of pics. They will be 2yrs old on the 29th. http://www.donzi.net/photos/jslahtosky22.jpg
http://www.donzi.net/photos/jslahtosky23.jpg

Thanks Jim

[ToonaFish]

Man, what a race team you have produced!

They are precious!

Bunches,

Celene "betting you'll be blowing lots of gaskets in the next sixteen years"