PDA

View Full Version : Prop Anylizer



Paul Hood
03-15-2000, 11:16 AM
Did anyone save the prop analyzer address that was posted on the old board?

Kenn
03-15-2000, 11:54 AM
While we are waiting you might try Hill Marine's website as they have a propeler and efficiency analyzer.

Kenn
03-15-2000, 11:55 AM
Is there a spell checker somewhere on this board??

BERTRAM BOY
03-15-2000, 12:03 PM
Paul,
I believe that Owen also posted a prop analyzer. OWEN !!!!! where are you.
BERTAM BOY

------------------

Donziflyer
03-15-2000, 12:56 PM
Ken and the rest of you-

Thanks for the Hill Marine site. I will be making a couple small HP/RPM (about 30 HP I hope) upgrades this spring to maximize the engines capabilities (carb & ignition)and want to see if I will be needing to get a different prop to maximize them if needed to get to 65-68 MPH from the present 58 MPH WOT, but the cost of a great prop http://206.150.187.82/ubb/eek.gif! My 89 22' Classic is as stock as a rock and runs 58 MPH @ 4500 RPM with a 330 HP OMC/Ford 460 King cobra (Holley 600 CFM sitn' on top - the BBF is suckn' so hard at an idle that the ladies on the beach think Donzis whistle at tight butts) with a OMC Cobra drive spinning a 14x21+ SS Viper Prop. I know a lot about what the Ford 460 can do in stock form but I only know a little about what will limit it's RPM and the relative speed obtainable in my boat http://206.150.187.82/ubb/confused.gif and I can guarantee that the two local marine shops in town know little more if any more than I. What is the wise word you guys??


------------------
PaulH

GEOO
03-15-2000, 08:49 PM
The Prop Analyzer http://member.aol.com/ejoejr/PropAnalyzerAppletG.html
Bam's Boat speed & prop Calculator http://www.go-fast.com/

GEOO


Originally posted by Paul Hood:
Did anyone save the prop analyzer address that was posted on the old board?

Donziflyer
03-15-2000, 11:10 PM
Thanks Geoo-

This board is cool huh http://206.150.187.82/ubb/cool.gif


------------------
PaulH