View Full Version : Someone needs to buy this!!
HP 600SC
11-04-2002, 10:56 PM
Here is a DEAL for an arneson on e-bay
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1871966258
Am I seeing things or is the prop shaft wound like a screw. Looks like it took a heck of a hit.
you mean wher the prop grooves are?
clayman
11-05-2002, 09:04 AM
I made4 a low bid, and I emailed him a question about the splines, looks twisted to me.
James
Wildfire
11-05-2002, 09:57 PM
Looks twisted to me too. The bearings are stock items, but that shaft can't be cheap. No hydraulics either. Makes me want to go swimming for mine.
harbormaster
11-05-2002, 09:59 PM
Hey wildfire. Swimming for yours? Tell us the story.
Make sure it comes with the steering and trim rams. They cost Over $ 1,500.00 for a new set!!!
Hum ....That fin is smaller then mine, but more angle.... :rolleyes:
HP 600SC
11-06-2002, 06:59 AM
Poodle, sounds good to me! as long as you clean up the oil too. can you use the HP-500 engine too?
Ted M.
Looped
11-06-2002, 05:21 PM
Is this one of the older ones that is chain driven with only a right hand rotation? If so, you may want to think about it....
Chain Drive = LH rotation
Gear Drive = RH rotation
No Arneson's are shiftable. All use internally mounted Borg Warner style transmissions...or paddles.
Chris
Looped
11-06-2002, 05:43 PM
Alright, maybe I’m dyslectic :D
clayman
11-06-2002, 06:20 PM
The guy still hasn't answered my question about the shaft, or if it comes with rams or not.
clayman
11-07-2002, 06:08 PM
THe guy finally emailed me back, and said the shaft is not twisted at all and is good working order , just needs cleaning, no rams though.
james
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.