View Full Version : Hydraulic trim pump
Zinger
02-01-2003, 05:24 AM
I need some help on the correct location for my hydraulic trim pump, it's a 86 18 ft. Classic and the pump was mounted to the rear of the stringer with spacers . This doesn't look like the factory installed this way. Any advice or pictures would be helpful. Thanks Jeff
clayman
02-01-2003, 08:19 AM
Here is a picture of my 1986 18 classic and its trim pump. ( which still has a bad seal) man I need to fix that. IT is bolted to a bracket which is bolted to the stringer. http://www.donzi.net/photos/jspiroff96.jpg
Scott Pearson
02-01-2003, 09:42 AM
Here is my trim pump on my 18. I made a platform to mount it on. Its on the starboard side.
http://www.donzi.net/photos/speartrim.jpg
(NJ)Scott
Scott beautiful job! I have always if possible liked to mount them on the transom out of the way.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.