View Full Version : Question for Jaroot...
Riley
07-20-2001, 07:16 PM
Jamie, I think you mentioned in a thread a while back that you had an extra mount plate for a 4bbl carb. Do you still have it? And if so, does it mount up all of the standard Mercruiser cables, etc? Is is specifically for a Holley application, or can it be used with any square bore carb? I'm interested in it, if you still have it.
Thanks, Chris
Riley
07-23-2001, 05:52 AM
Hi Jamie, as far as props go, I hav a 23" vengeance, and 19" vengeance, a 21" Mirage, and a 21" Michigan Wheel Ballistic. Let me know what you need.
Do you have the part # for the Mercruiser adapter you spoke of?
Thanks,
Chris
terry
07-23-2001, 06:30 AM
Riley,
Rex Marine's part number for the mercruiser angle bracket is
MOR 36174A
make sure you don't lose the steel sleeve in the plastic barrel on the cable though when you take it apart!
Rootsy
07-24-2001, 07:34 AM
holy smoke.. lets see if i am still terry or not!!!! i didn't even notice that!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.